MODEL- PAP2T-NA VENDOR- LINKSYS
FEATURES- Internet Phone Adapter with 2 Ports for Voice-over-IP
Feature-Rich VoIP Service through your High-Speed Internet
Connection!
The Linksys Internet Phone Adapter enables high-quality feature-rich
VoIP (voice over IP) service through your broadband Internet
connection. Just plug it into your home Router or Gateway and use
the two standard telephone ports to connect analog phones or use
one of the ports for a fax machine. Each phone port operates
independently, with separate phone service and phone numbers, like
having two telephone lines. You'll get clear reception and a
reliable fax connection, even while using the Internet at the same
time.
With Internet telephony, along with low domestic and international
phone rates, an impressive array of special telephone features are
available. Choose your preferred free local dialing area code,
regardless of where you live. Or add a virtual telephone number in
any area code, forwarded to your Internet phone. You can even add a
toll-free number. The Linksys Internet Phone Adapter is compatible
with these and all of the other special telephone features that are
available from your Internet telephony service provider, such as
Caller ID, Call Waiting, Voicemail, Call Forwarding, Distinctive
Ring, and much more.
Let the Linksys Internet Phone Adapter enhance your existing
Internet connection with a high-quality high-value VoIP service.
Includes PAP2T Phone Adapter Unit, Power Adapter, RJ-45 Ethernet Cable,
Quick Installation Guide.
* Enables feature-rich telephone service over your broadband Internet
connection.
* Two standard telephone ports for analog phones or use one of the ports
for a fax machine, each with an independent phone number.
* High quality, clear sounding voice service simultaneous with Internet
use.
* Two voice ports (RJ-11) for analog phones or Fax machines
* Impedance Agnostics - 8 Configurable Settings
* Call Waiting, Cancel Call Waiting, Call Waiting Caller ID
* Caller ID with Name/Number (Multi-national Variants)
* Caller ID Blocking
* Call Forwarding: No answer, Busy, All
* Do Not Disturb
* Call Transfer
* Three-way Conference Calling with Local Mixing
* Message Waiting Indication - Visual and Tone Based
* Call Return
* Call Back on Busy
* Call Blocking with Toll Restriction
* Delayed Disconnect
* Distinctive Ringing - Calling and Called Number
* Off-hook Warning Tone
* Selective/Anonymous Call Rejection
* Hot line and Warm Line Calling
* Speed Dialing of 8 Numbers/Addresses
* Music on Hold
-- SPECIFICATIONs ------------------------------------
DATA NETWORKING-
MAC Address (IEEE 802.3)
IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6
(RFC 1883).
ARP - Address Resolution Protocol
DNS - A Record (RFC 1706), SRV Record (RFC 2782)
DHCP Client - Dynamic Host Configuration Protocol (RFC 2131)
ICMP - Internet Control Message Protocol (RFC792)
TCP - Transmission Control Protocol (RFC793)
UDP - User Datagram Protocol (RFC768)
RTP - Real Time Protocol (RFC 1889) (RFC 1890)
RTCP - Real Time Control Protocol (RFC 1889)
DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349)
SNTP - Simple Network Time Protocol (RFC 2030)
VOICE GATEWAY- SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263,
3264).
SIP Proxy Redundancy - Dynamic via DNS SRV, A Records
Re-registration with Primary SIP Proxy Server
SIP Support in Network Address Translation Networks - NAT
(incl. STUN).
Secure (Encrypted) Calling via Pre-Standard Implementation
of Secure RTP.
Codec Name Assignment
VOICE ALGORITHMS-
G.711 (A-law and -law)
G.726 (16/24/32/40 kbps)
G.729 A
G.723.1 (6.3 kbps, 5.3 kbps)
Dynamic Payload
Adjustable Audio Frames per Packet
FAX CAPABILITY-
Fax Tone Detection Pass-Through
Fax Pass-Though - Using G.711
DTMF: In-band & Out-of-band (RFC 2833) (SIP Info)
Flexible Dial Plan Support with Interdigit Timers and IP
Dialing.
Call Progress Tone Generation
Jitter Buffer - Adaptive
Frame Loss Concealment
Full Duplex Audio
Echo Cancellation (G.165/G.168)
VAD - Voice Activity Detection with Silence Suppression
Attenuation/Gain Adjustments
Flash Hook Timer
MWI - Message Waiting Indicator Tones
VMWI - via FSK
Polarity Control
Hook Flash Event Signaling
Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI
Music on Hold Client
Streaming Audio Server - up to 10 sessions
SECURITY - Password Protected System Reset to Factory Default
Password Protected Admin and User Access Authority
Provisioning/Configuration/Authentication:
- HTTPS with Factory Installed Client Certificate
HTTP Digest - Encrypted Authentication via MD5 (RFC 1321)
Up to 256-bit AES Encryption
PROVISIONING, ADMINISTRATION & MAINTENANCE-
Web Browser Administration & Configuration via Integral Web
Server.
Telephone Key Pad Configuration with Interactive Voice
Prompts.
Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP
Asynchronous Notification of Upgrade Availability via NOTIFY
Non-intrusive, In-Service Upgrades
Report Generation & Event Logging
Stats in BYE Message
Syslog & Debug Server Records - Per Line Configurable
CONNECTORS - (1) 10BaseT/RJ45 Ethernet port (IEEE 802.3)
(2) RJ-11 FXS Phone ports (for analog circuit telephone
device), (Tip/Ring).
SUBSCRIBER LINE INTERFACE CIRCUIT- (SLIC)
Ring Voltage : 40-55 VRMS Configurable
Ring Frequency : 10 Hz - 40 Hz
Ring Waveform : Trapezoidal and Sinusoidal
Maximum Ringer Load: 3 REN
On-hook/off-hook Characteristics:
On-hook voltage (tip/ring): -50 V NOMINAL
Off-hook current : 25 mA min
Terminating Impedance : 8 Configurable Settings
including North America 600 ohms, European CTR21.
INDICATORS - LEDs for Power, Ethernet, Phone1, Phone2
APPROVALS - FCC (Part 15, Class B), cUL, CE, IC-003, A-Tick
POWER SOURCE - DC Input Voltage: +5 VDC at 2.0 A Max.
Power Consumption: 5 Watts
Switching Type (100-240v) Automatic
Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input, 1.8m
cord.
DIMENSIONS - 3.98" x 3.98" x 1.10" WT.- 5.4 oz.
www.linksys.com
|