MODEL- EXT-COMPAUD-148S    VENDOR- GEFEN
     
FEATURES- 1:8 Component CAT5 Distribution Sender
       Distribute one source to eight displays!
       With one Component input and eight Component outputs, the 1:8 
        Component CAT5 Distribution Amplifier is the perfect solution for 
        anyone who needs to send one Component source to multiple displays 
        in remote locations at the same time. The 1:8 Component CAT5 
        Distribution Amplifier has eight RJ-45 output connectors and one 
        Component input. The 1:8 Component CAT5 Distribution Amplifier's 
        RJ-45 connectors can be connected to up to eight Component CAT5 
        Distribution Amplifier Receivers using industry standard CAT5/6 
        cables. The receivers can be placed up to 330 feet away from the 
        transmitter.
       Simply connect your Component video source to the 1:8 Component CAT5 
        Distribution Amplifier's input using the supplied Component cable. 
        Then connect up to eight Component displays to the Component CAT5 
        receivers. Plug in the power supply to the 1:8 Component CAT5 
        Distribution Amplifier and the Receivers will get draw power from 
        the main unit. Note: Component output 1 is the primary connection 
        whose EDID will be used for displays two through eight. The 
        Component displays that are attached to ports two through eight on 
        the 1:8 Component CAT5 Distribution Amplifier MUST have the same 
        native resolution in order to get a picture. The 1:8 Component CAT5 
        Distribution Amplifier will extend a Component signal OR a 
        composite video w/ L+R analog audio. For this to work, you will 
        need to simply connect your composite video w/ L+R analog audio to 
        the red, green, and blue inputs making sure that you keep the same 
        color order of cabling on the output ports. 
       Note: Power supply connects to sender unit. Receiver is powered 
             through the sender (Receivers not included).
    Includes 1:8 Component CAT5 Distribution Amplifier, 6 foot VGA to 
      Component cable, One 5V external power supply.
* Easily distribute one source to eight simultaneous displays 
* Extends video signals up to 330 feet over CAT-5e 
* Supports component video distribution 
* Maintains 1080p resolution video 
* Allows eight monitors to be connected to the same video source at the 
  same time.
    
  -- SPECIFICATIONs -----------------------------------
VIDEO AMPLIFIER BANDWIDTH - 350 MHz 
INPUT VIDEO SIGNAL        - 1.2 volts p-p 
INPUT SYNC SIGNAL         - 5 volts p-p (TTL) 
HORIZONTAL FREQUENCY RANGE- 15 - 70 KHz 
VERTICAL FREQUENCY RANGE  - 30 - 170 Hz 
VIDEO IN                  - HD-15 
VIDEO OUT                 - 3 RCA Component 
LINK CONNECTOR            - RJ-45 shielded
POWER SOURCE              - 5 VDC (External) Power Supply
                            Consumption: 30 Watts (max.) 
DIMENSIONS                - Sender  : 8.5"W x 1.75" H x 4.5"D 
                            Receiver: 3.75"W x 1.25"H x 2"D 
www.gefen.com