KEY FEATURES- Advanced, modular power management for datacenters and mission critical servers. Line Interactive Topology.
* Main processor with FineLine voltage regulator
* LED display/interface provides UPS status, UPS control, UPS test, UPS diagnostic info. Programmable 2 x 16 characters.
* Multilingual Matrix-UPS speaks French, German, Spanish or English
* Hot Swap electronic module is Matrix-UPS' primary electronic component
* SmartSlot accessory bay allows easy customization
* Battery microprocessor provides on-board diagnostics
* Isolation transformer allows multiple output voltages in bypass mode
* "Replace SmartCell" LED
* Intelligent Bypass (automatic upon failure or user switchable)
* Intelligent Serial Interface (your site's power quality can be monitored)
* SNMP Capability (via APC SNMP adapter)
* Multiple server/operating system shutdown (via Share-UPS or SmartSlot Interface Expander)
* Modem control (via SmartSlot Call-UPS II)
* Environmental monitoring (via SmartSlot Measure-UPS)
* Computer and Network interface (OS/2,OS/400,VAX,Novell,UNIX,LAN Manager
* Emergency Power Off (EPO) capability (input for external EPO closure)
* Galvanic Isolated Bypass
* Compatible with PFC
VOLT/AMP RATING- 5000
* WATT RATING - 3750
NOMIMAL SINGLE PHASE INPUT VOLTAGE, FREQUENCY- 208/240 Vac, 60Hz
INPUT VOLTAGE RANGE (% of nominal) FOR MAIN OPERATION- -25% to +15%
INPUT FREQUENCY RANGE (% of nominal) FOR MAIN OPERATION- +-5%
EFFICIENCY AT FULL LOAD, ON-LINE THERMAL DISSIPATION (BTU/hr)- >93%,900
NOMINAL OUTPUT VOLTAGE- 120/208/240 Vac
OUTPUT VOLTAGE REGUALTION- +-5%, adjustable
OUTPUT VOLTAGE DISTORTION (on battery)- <5% THD
OUTPUT FREQUENCY REGULATION- synchronized 0.1% of nominal during mains fail- ure.
TYPICAL TRANSFER TIME WITH COMPUTER LOAD- 0ms
SMARTCELL BATTERY SYSTEM- Individual Pack voltage and current monitoring: self diagnostic, replace battery warning indicator Nominal Battery system voltage: 48Vdc Method of replacement : Hand-pluggable, hot swappable by user Expansion Capacity : Unlimited (includes 2 packs) Run Time with Supplied Packs : 8 full load/20 half load Recharge Time w/supplied packs: 2.7 hours
ON-BATTERY OUTPUT VOLTAGE- Pure sine wave output at 115 VAC +/-5%, -10% after low battery warning, synchronized to utility line.
CONTROLS/DISPLAYS-SmartBoost LED, On-line LED, Load Display, SmartTrim LED, On/Test Button, Off Button, Overload LED, Battery Charge/Line Voltage Dis- play, On-Battery LED, Replace Battery LED.
SOFTWARE- ships with PowerChute Plus that supports Windows NT, Novell Net- Ware, Windows, Windows 95, Windows for Workgroups and SNMP Agent Plug-in for NetWare and Windows NT.
APPROVED REGULATORY STANDARDS-UL per 1778, CSA per C22.2, TUV per IEC 950, FCC, CDC, ENS55022 $25,000 Lifetime Equipment Protection Policy.