MODEL- CM73DD1024R-667 VENDOR- CORSAIR
FEATURES- 1GB Ultra Stable Server Memory
PC2-5300, 240-pin RIMM, Single Rank, 1.2" height.
Corsair's Server Memory is specifically designed for rock-solid
stability in demanding server applications. Data lines are
carefully engineered for noise immunity; clock lines are
optimized for minimum skew. All modules use JEDEC-compliant six-
layer, impedence-controlled printed circuit boards, with 30 micro-
inches of selectively plated gold ensuring a proper interface with
the DIMM socket.
The CM73DD1024R is a DDR2 Dual Inline Memory Module (DIMM), designed
for applications in which both per formance and density are
critical. This DIMM includes Error Checking and Correcting (ECC)
for maximum reliability, and has registered address and control
signals to enable fully confi gured systems. These modules are
constructed using 512 MBit SDRAMs, and are fully compliant with
JEDEC specifications.
These DIMMs are constructed using 128MB x 4 SDRAMs in BGA packages.
The module also includes an EEPROM to support Serial Presence
Detect (SPD) requirements. Decoupling capacitors are mounted on the
printed circuit board for each SDRAM device, and On-Die Termination
is prodived on all lines. The synchronous design of these Corsair
SDRAM DIMMs allows precise cycle control with the use of the system
clock. I/O transactions are possible on every clock cycle. The high
clock frequency and high density of this device enable a high level
of performance to be achieved in advanced workstations and servers.
* 240-pin, dual in-line memory module (DIMM)
* Ultra high density using 512 MBit SDRAM devices
* ECC 1-bit error detection and correction
* Registered inputs with one-clock delay
* Phase-locked loop (PLL) clock driver to reduce loading
* 128 MB x 72
* JEDEC standard 1.8V I/O (SSTL_18-compatible)
* Four-bit prefetch architecture
* Off-chip driver (OCD) impedance calibration
* On-die termination (ODT)
* Low profile (1.2"), ideal for 1U rack mount servers
www.corsair.com
|