MODEL- WAP200             VENDOR- LINKSYS                                
    
FEATURES- Wireless-G Access Point with Power Over Ethernet and RangeBooster
       High-Speed Wireless Access for Existing Networks!
       RangeBooster technology is a compatible add-on to standard 
        Wireless-G which increases your wireless network's range up to two 
        times, and its throughput by up to 35%. Unlike ordinary wireless 
        technologies that are confused by signal reflections, RangeBooster 
        uses two smart receivers at each end to detect and decode reflected 
        signals at distances where standard technologies give up. You'll 
        find that "dead spots" in the wireless coverage area are reduced, 
        too. 
       The Advanced security features makes this solution ideal for your 
        Business. Advanced wireless security using Wi-Fi Protected Access
        (WPA2 Enterprise) with up to 256-bit encryption, and the new 
        Wireless Security Monitoring functionality gives your business the 
        visibility and protection it needs. Used when Linksys 200-Series 
        Wireless Adapters are present, the Wireless Security Monitoring 
        functionality alerts you of possible wireless intruders, 
        vulnerabilities in the wireless deployment, and visibility into 
        Denial of Service attacks. 
       The Linksys WAP200 Access Point lets you connect Wireless-G 
        (802.11g) or Wireless-B (802.11b) devices to your wired network so 
        you can add PCs to the network with no cabling hassle. Power over 
        Ethernet support makes it easy to install -- you can mount the 
        Access Point anywhere, even without ready access to a power plug. 
        With appropriate Power Over Ethernet support at the other end, you 
        only need to run one cable to the Access Point to deliver both data 
        and power. Of course, you can also use the included AC adapter if 
        your installation point has power available nearby. 
       Moreover, the integrated QoS features provide consistent voice and 
        video quality on both the wired and wireless networks, enabling the 
        deployment of business qualilty VoIP and video applications. 
       Additional features like Multiple BSSIDs, Wireless Roaming, Auto-
        channel selection, and Load Balancing, make this solution ideal for 
        your Business. 
    Includes Wireless-G Access Point, (2) SMA detachable Dipole antennas,
      User Guide on CD-ROM, Ethernet Network Cable, Power Adapter, Product 
      Stands, Registration Card.
* Standards-based POE (IEEE 802.3af) or External DC power.
* RangeBooster technology for up to twice the range, reduced dead spots, 
  and up to 35% more throughput than standard Wireless-G.
* Advanced wireless security using Wi-Fi Protected Access (WPA2) with up to 
  256-bit encryption, and new Security Monitoring Feature gives your 
  business the visibility and protection it needs.
* Support for WMM provides improved QoS over wireless connections for 
  better video and voice performance. 
     
  -- SPECIFICATIONs ---------------------------------
STANDARDS     - IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u,
                  IEEE802.3af (Power Over Ethernet), 802.1p (QoS priority),
                  802.1q (VLAN), 802.1X (Security Authentication),
                  802.11i - Ready (Security WPA2), 802.11e - Ready 
                  (Wireless QoS), 802.11F (Wireless Roaming).
CONNECTORS    - 10/100 Base-T Ethernet, 12 VDC Power
BUTTONS       - Reset
CABLE TYPE    - UTP Category 5
INDICATORS    - LEDs for Power, PoE, Wireless, Ethernet
OPER. SYSTEM  - Linux
SETUP/CONFIG. - WebUI: Built in Web UI for Easy browser-based configuration 
                         (HTTP/HTTPS).
MANAGEMENT    - SNMP Version   : SNMP Version 1, 2c, 3
                Event Logging  : E-mail Notification
                                 Remote Syslog
                Web F/W upgrade: Firmware Upgradable Through Web-Browser
                Diagnostics    : Flash, etc. Diags: Flash, RAM, LAN, WLAN
                DHCP           : DHCP Client
OPERATE MODES - Access Point   : Access Point Mode, point-to-point Bridge 
                                   Mode, point-to-multipoint Bridge Mode, 
                                   Repeater Mode.
WIRELESS      - Spec/Modulation: Radio and Modulation Type: 802.11b/DSSS, 
                                   11g/OFDM.
                Channels       : 11 North America
                                 13 Most of Europe (ETSI and Japan)
                Antenna        : (2) External Antennas (Omni-Directional) 
                                     SMA detachable
                Transmit Power : Transmit Power (Adjustable) @ Normal Temp 
                                 Range: 11b - 18 dBm; 11g - 14 dBm
                Antenna Gain   : 2 dBi
                Receiver
                    Sensitivity: 11.g: 54Mbps@ -72dBm
                                 11.b: 11Mbps@ -85dBm
SECURITY      - WEP/WPA/WPA2   : WEP 64-bit/128-bit, WPA-PSK, WPA2-PSK, 
                                   WPA-ENT, WPA2-ENT.
                Access Control : Wireless Connection Control: MAC-Based
                SSID Broadcast : Enable/Disable
                802.1X         : IEEE 802.1X support
                Wireless Client
                      Isolation: Wireless Client devices can be isolated 
                                   from each other, either within an SSID 
                                   or between two SSIDs.
                Wireless
                       Security: Monitor Scan and Classify wireless devices 
                                   in the network.
                                 Report new client and AP joining network 
                                   and suspicious network events. (Works 
                                   together with 200 Business series client 
                                   adapters):
                                    1. Intrusion Alarms (e.g., Rogue Client 
                                         Detected, Spoofed MAC address).
                                    2. Denial of Service Alarms (e.g., 
                                         Duration Attack, Association Table 
                                         Full).
                                    3. Vulnerability Alarms (e.g., AP is 
                                         not using encryption, AP is 
                                         broadcasting SSID).
                                    4. Other Alarms (e.g., Low speed 
                                         connection).
QUALITY OF SERVICE-
                QoS            : 4 Queues
                                 WMM Wireless priority
                General        : Wireless roaming based on IAPP
                                 Load Balancing
                                 Auto-channel selection
REQUIREMENTS  - 802.11b, 802.11g Wireless Adapter With TCP/IP Protocol 
                  Installed Per PC.
                Switch/Router with Power Over Ethernet (PoE) Support Or PoE 
                  Injector when used with PoE.
                Web-Based Configuration Java-Enabled Web Browser
APPROVALS     - FCC, ICES-003, CE
POWER SOURCE  - 12V 1A DC input, and IEEE 802.3af Compliant PoE
DIMENSIONS    - 6.69"w x 8.07"h x 7.68"d       WT.- 0.88 lbs.
      www.linksys.com