MODEL- CNPS7700-AlCuLED    VENDOR- ZALMAN USA
    
FEATURES- CPU Cooler Fan- Aluminum & Copper
       Supports Intel Pentium4 Socket 775/478 or AMD Sempron/AMD64 Socket 
        754/939/940.
       Note: No motherboard components with a height greater than 39mm 
             (1.53 inch), as well as the PSU, disk drives, VGA card, and 
             RAM should be present within a 68mm (2.68 inch) radius from 
             the center of the CPU.
    Includes Heatsink Assembly (CNPS7700-AlCu LED), Four Grips (2 each for 
      S-Type and L-Type), Four Bolts, Thermal Grease, Fan Speed Controller 
      (FAN MATE 2), Double-sided Tape (for installing FAN MATE 2), Cable 
      for FAN MATE 2, User's Manual - in English and Korean.
      Also includes Components for Intel Pentium 4 (Socket 775): One Clip 
      Support for Socket 775, One Backplate for Socket 775, Four Clip 
      Support Fixing Bolts.  
      Also includes Components for Intel Pentium 4 (Socket 478): Two Clip 
      Supports for Socket 478.
      Also includes Components for AMD Sempron/AMD64: (Socket 754/939/940)  
      Two Nipples, One Backplate for AMD64, One set of Washers.
* Pure Copper and Pure Aluminum base material ensures excellent heat 
  dissipation.
* Supports Intel Dual Core Pentium / Pentium 4 (Socket 775), Intel 
  Pentium 4 (Socket 478), AMD Athlon 64 X2 Dual Core, Sempron/AMD64 (Socket 
  754/939/940) for broad compatibility.
* The large 120mm fan inside the FHS maximizes cooling performance by 
  providing sufficient airflow even at low fan speed.
* The large 120mm fan provides air flow over a large area, cooling not only 
  the CPU, but the VGA card, Northbridge, FET, and RAM as well.
* The high intensity red LEDs will operate with sufficient brightness even 
  in low operating oltage.
* The adjustable fan speed controller (FAM MATE 2) enables control of noise 
  and fan performance.
     
  -- SPECIFICATIONs ------------------------------------
CNPS7000-AlCu - Dimensions        : 136 (L) x 136 (W) x 67 (H) mm 
                Weight            : 600 grams
                Base Material     : Pure Copper & Pure Aluminum
                Dissipation Area  : 3,268 cm2
                Bearing Type      : 2-Ball
                Speed             : 1,000 - 2,000 RPM +/- 10%
                Thermal Resistance: 0.19 - 0.28 degrees C/W
                Noise Level       : 22.7 - 37.1 dB +/- 10%
FAN SPEED CONTROLLER- (FAN MATE 2)
                Dimensions        : 70 (L) x 26 (W) x 26 (H) mm 
                Weight            : 20 grams
                Output Voltage    : 5V - 11V +/- 2% 
                Allowable Power   : 6W or lower 
                Connector         : 3-Pin 
www.zalman.co/kr