MODEL- LP-P11011-S6       VENDOR- SIIG
    
FEATURES- Low Profile PCI-1S1P
       One serial (16550) and one ECP/EPP parallel port, Universal PCI card 
        designED to work in 32-/64-bit, 3.3V/5V PCI and PCI-X slots. 
       Supports 32-/64-bit, 3.3V/5V PCI and PCI-X slots.
       One high-speed 16550 UART serial port (9-pin) supports data rate up 
        to 230 Kbps.
       Will work as standard RS232 port or with 5V or 12V power output for 
        devices that require power (such as handheld scanners, table 
        scanners, POS displays, etc.). Configurable via jumpers with silk-
        screened settings on PCB.
    Includes Low Profile PCI-1S1P adapter, 1S1P fanout cable, Driver CD,
      User manual.
* IRQ sharing reduces IRQ conflicts 
* Built-in 32-byte serial port FIFO buffers dramatically increase data 
  transmit/receive speed, especially under Windows multitasking 
  environment.
* 4-layer PCB board: separate layers for data & grounding. Greatly reduces 
  signal noise & loss. Delivers more reliable high-speed data transfers.
* Enhanced bracket design to prevent bending. Connected to PCB with 
  washered screws for a more secure connection.
* Supports 3.3V operation with 5V tolerance 
* Conforms to PCI v2.2 universal card standard. PCI-X & 64-bit compatible.
* Supports PME # (Power Management Event). Allows device to request a 
  change in system power state (wake up system).
* Use SMT (Surface Mount Technology) type electrolytic capacitor. Low ESR 
  (Equivalent Series Resistance) aluminum electrolytic capacitor. Offers 
  much improved noise suppression & achieves higher levels of performance/
  reliability.
* Use SMT (Surface Mount Technology) type crystal. Offers cleaner design 
  than traditional DIP-type crystal. Provides greatly improved grounding, 
  which reduces EMI emission & improves performance/reliability.
     
  -- SPECIFICATIONs -----------------------------------
INTERFACE/BUS- 32-bit PCI v2.2
CONNECTORs   - (1) 9-pin RS-232 Serial port
               (1) 25-pin ECP/EPP parallel port
CHIPSET      - CyberPro
O/S SUPPORT  - Windows 95/98/98 SE/ME/NT4.0/2000/XP/Server 2003
REQUIREMENTS - Pentium or equivalent computer 
               available 32-/64-bit PCI or PCI-X slot 
               Windows 95 or later 
APPROVALS    - FCC Class B (DoC) & CE
             www.siig.com  
                                                      support@siig.com