MODEL- LP-P01D11-S6       VENDOR- SIIG
    
FEATURES- Low Profile PCI-1S+DOS
       Single serial (16550) port, low profile Universal PCI card design 
        with built-in 32-byte FIFO buffers to work in 32-/64-bit, 3.3V/5V 
        PCI and PCI-X slots.
       A low profile form factor PCI card made for space constrained system 
        designs.
       Supports 32-/64-bit, 3.3V/5V PCI and PCI-X slots.
       One high-speed 16550 UART serial port (9-pin) supports data rate up 
        to 230 Kbps.
       Will work as standard RS232 port or with 5V or 12V power output for 
        devices that require power (such as handheld scanners, table 
        scanners, POS displays, etc.). Configurable via jumpers with silk-
        screened settings on PCB.
    Includes Low Profile PCI-1S+DOS card, Driver CD and User manual.
* Built-in 32-byte FIFO buffers dramatically increase data transmit/receive 
  speed, especially under Windows multitasking environment.
* 4-layer PCB board: separate layers for data & grounding. Greatly reduces 
  signal noise & loss. Delivers more reliable high-speed data transfers.
* Enhanced bracket design to prevent bending. Connected to PCB with 
  washered screws for a more secure connection.
* Supports 3.3V operation with 5V tolerance 
* Conforms to PCI v2.2 universal card standard. PCI-X & 64-bit compatible.
* Supports PME # (Power Management Event). Allows device to request a 
  change in system power state (wake up system).
* Use SMT (Surface Mount Technology) type electrolytic capacitor. Low ESR 
  (Equivalent Series Resistance) aluminum electrolytic capacitor. Offers 
  much improved noise suppression & achieves higher levels of performance/
  reliability.
* Use SMT (Surface Mount Technology) type crystal. Offers cleaner design 
  than traditional DIP-type crystal. Provides greatly improved grounding, 
  which reduces EMI emission & improves performance/reliabiilty.
     
  -- SPECIFICATIONs -----------------------------------
INTERFACE/BUS- 32-bit PCI slot
CONNECTORs   - (1) 9-pin RS-232 Serial port
CHIPSET      - CyberPro
O/S SUPPORT  - DOS, Windows 95/98/98SE/ME/2000/XP/Server 2003 
               Linux Kernel 2.4.x or later
REQUIREMENTS - Pentium or equivalent computer 
               available 32-/64-bit PCI or PCI-X slot 
               DOS, Windows 95/98/98SE/ME/2000/XP/Server 2003 
               Linux Kernel 2.4.x or later 
APPROVALS    - FCC Class B (DoC) & CE
             www.siig.com  
                                                      support@siig.com