MODEL- 2L1003P/C          VENDOR- ATEN CORP
    
FEATURES-  MasterView PS/2 KVM Cables- 10 ft.
       The cables that you use when connecting your computer to our 
        MasterView KVM switches play a very important role in the quality 
        of the communication between the PCs and the MasterView unit. Our 
        custom made cables are designed to provide the highest signal 
        capacity along with the lowest signal loss. What this means, to you 
        as the consumer, is that you will receive the highest quality video 
        output even in the higher SuperVGA video modes. 
* An Average Cable 
   Your average cable has one layer of shielding, a thin layer of mylar 
   foil that has been cut into a very long and narrow, approximately one 
   half of an inch wide, strip that is wound in a spiral pattern around the 
   wires, also called leads, in order to reduce the cost of the cable. 
   There are a few problems with this method of shielding a signal bearing 
   cables, first and foremost among them is the fact that this wrapped foil 
   method can "leak" RF (radio frequency) interference. Additionally the 
   manufacturers of your average cables use very small wires to carry the 
   information generally they use 28 or 26 AWG wires (in AWG the higher the 
   number for the gauge the smaller the actual size of the wire) to carry 
   their information, this is another concession to reducing the 
   manufacturing costs of the cables. Some of your other "Premium" cables 
   are made in the same way and with the same materials as your average 
   cable. The manufacturers put fancy connectors on the cable then stamp 
   the word "Premium" on the packaging and then charge you more for the 
   cable. 
* ATEN's Premium Cable 
   At ATEN we have invested millions of dollars into cable manufacturing to 
   ensure the highest quality cables at the lowest possible cost. Our 
   cables are double shielded, beneath the PVC outer insulator you will 
   find a copper braid RF shield, then beneath that you will find the mylar 
   foil shield. Unlike our competitors instead of spiral wrapping the mylar 
   foil shield, we take a single piece and enclose the signal carrying 
   wires in a one-piece envelope. All our cables are manufactured with low 
   resistance and low capacitance 24 AWG wires to ensure the best video 
   performance. Another important difference between our cables and those 
   of our competitors is that we use coaxial wires to carry the red, green, 
   and blue video signals. Our competitors just throw the signal and its 
   ground on two separate wires. By using coaxial wires we reduce the 
   possibilities of interference even farther. Our video cable is also 
   built in compliance with standard UL 2919. The cables we manufacture for 
   our mouse and keyboard are also built to our high quality requirements 
   and are in compliance with the UL 2464 standard. 
    
  -- SPECIFICATIONs ---------------------------------
CONNECTORS   - PC Cable : (1) 6-pin Mini-DIN male
                          (1) 6-pin Mini-DIN male
                          (1) 15-pin HDB male
               KVM Cable: (1) 6-Pin Mini-DIN male
                          (1) 6-Pin Mini-DIN male
                          (1) 15-pin HDB male
www.aten-usa.com