A Ballistix dual inline memory module (DIMM) consists of a number of
memory components that are attached to a black printed circuit board.
The gold pins on the bottom of the DIMM provide a connection between
the module and a socket on a larger printed circuit board. The pins on
the front and back of a DIMM are not connected to each other.
Ballistix 240-pin DIMMs are used to provide DDR2 SDRAM memory for
desktop computers. DDR2 is a leading-edge generation of memory with an
improved architecture that allows it to transmit data very fast.
Ballistix 240-pin DIMMs are available in DDR2 PC2-4200 SDRAM (DDR2
533), DDR2 PC2-5300 SDRAM (DDR2 667), and DDR2 PC2-6400 (DDR2 800).
To use DDR2 memory, your system motherboard must have 240-pin DIMM
slots and a DDR2-enabled chipset. A DDR2 SDRAM DIMM will not fit into a
standard SDRAM DIMM socket or a DDR DIMM socket. (Information about
which memory technology your system uses is included in the Crucial
Memory Advisor™ tool.)
The number of black components on a Ballistix 240-pin DIMM can vary,
but it always has 120 pins on the front and 120 pins on the back, for a
total of 240. Ballistix 240-pin DIMMs are approximately 5.25 inches
long and 1.18 inches high, though the heights can vary. While 240-pin
DDR2 DIMMs, 184-pin DDR DIMMs, and 168-pin DIMMs are approximately the
same size, 240-pin DIMMs and 184-pin DIMMs have only one notch within
the row of pins. The notch in a 240-pin DDR2 DIMM is closer toward the
center of the module.
- Part Number: BL6464AA663
- Module Size: 512MB
- Package: Ballistix 240-pin DIMM
- Feature: DDR2 PC2-5300
- Configuration: 64Meg x 64
- DIMM Type: UNBUFFERED
- Error Checking: NON-ECC
- Speed: DDR2-667
- Voltage: 2.2V
- Memory Timings: 3-3-3-12
- Specs: DDR2 PC2-5300 • 3-3-3-12 • UNBUFFERED •
NON-ECC • DDR2-667 • 2.2V • 64Meg x 64
|
Shopping Cart
