Welcome To NEUTRONEXPRESS.COM

Overview

The RP-COM(FIT)H-AF can be used in various forms of applications, such as to serve as a standard COM port on a Windows PC via Ethernet converted from the RS-232C serial communications interface.

Features

Two types of power supplies available

RP-COM(FIT)H: Corresponding to the wide input power supply (10 - 30VDC)
RP-COM(FIT)H-AF: 5VDC and PoE supporting the use of IEEE802.3af-compatible devices, enabling power to be supplied from UTP cables *1

Three operating modes selectable, depending on the usage

Virtual COM Mode:
Can be used like the standard COM ports of a PC (max. 32 ports)
Through Mode :
Can extend the distance between devices without changing settings or applications of each device (max. 254 pairs)
Modem Mode :
Creates communication programs capable of communications between multiple terminals (N:N, max. 254 terminals)

Up to 7 channels available for RS-232C (when three COM-2(FIT)GY's are added)

Add-on device modules [COM-2(FIT)GY] (for RS-232C 2ch) and [COM-1PD(FIT)GY] *2 (for RS-422A/RS-485 1ch) can be freely combined to allow up to three units to be added for extension

DHCP client function

Setup utility provided for easier device setup

RS-232C supports up to 921.600bps (Serial communication section)*3

The wired LAN can be 10Base-T or 100Base-TX (Ethernet section)

Provided a 35mm DIN rail attachment

*1: For supplying power from UTP cables, it is recommended to connect to our POW-CB30(af) or POW-CBM4(af).
*2: The multi-drop function is not supported in COM-1PD(FIT)GY.
*3: The speed may be affected by the party on the other side of the connection and the cable length.

Specifications

Item			RP-COM(FIT)H	RP-COM(FIT)H-AF
Serial unit	Serial standard		RS-232C
	Data transmission speed		300 - 921,600bps
	Number of channels		1
	Connector		9 pin D-SUB, M (Male) type
Wired LAN unit	Ethernet standard		IEEE802.3u,IEEE802.3	IEEE802.3u,IEEE802.3,IEEE802.3af
	Data transmission speed		10/100Mbps
	Access method		CSMA/CD
	Communication system		Half Duplex / Full Duplex
	Number of ports		1(10BASE-T/100BASE-TX)
Power over Ethernet function(IEEE802.3af)			Not supported	Supported
Supply voltage			10.0 - 30.0VDC ±5%	5.0VDC ±5% (In case of supply from the power connector)
Current consumption			When supplying 12.0VDC 0.2A (Max.) (Only RP-COM(FIT)H) When supplying 24.0VDC 0.1A (Max.) (Only RP-COM(FIT)H)	0.4A (Max.) (Only RP-COM(FIT)H-AF : In case of supply from the power connector)
External Dimensions (mm)			25.2(W)×64.7(D)×94.0(H) (No protrusions)
Weight			100g
Add-on module			RS-232C 2ch add-on : COM-2(FIT)GY For RS-422A/485 1ch add-on : COM-1PD(FIT)GY Combine COM-2(FIT)GY or COM-1PD(FIT)GY up to three freely Current consumption for one : COM-2(FIT)GY: 5VDC 0.1A(Max.) COM-1PD(FIT)GY: 5VDC 0.3A(Max.)
Operating temperature			0 - 50°C
Storage temperature			-10 - 60°C
Humidity			10 - 90%RH(No condensation)
Floating dust particles			Not extreme
Corrosive gases			None
Line-Noise resistance		Line-noise *1	AC line/±2kV,Signal line/±1kV(IEC1000-4-4Level 3,EN61000-4-4Level 3)
		Static electricity resistance	Contact discharge/±4kV(IEC1000-4-2Level 2,EN61000-4-2Level 2) Atmospheric discharge/±8kV(IEC1000-4-2Level 3,EN61000-4-2Level 3)
Vibration resistance		Sweep resistance	10 - 57Hz/semi-amplitude 0.15mm, 57 - 150Hz/2.0G 40minutes each in X, Y, and Z directions (JIS C0040-compliant, IEC68-2-6-compliant)
Impact resistance			15G, half-sine shock for 11ms in X, Y, and Z directions(JIS C0041-compliant, IEC68-2-27-compliant)
Grounding			Class D grounding (previous class 3 grounding)

*1: When using POA201-10 for RP-COM(FIT)H, when using POA200-20 for RP-COM(FIT)H-A

Customer Service	My Account	Company Info	Tools & Resources
Contact Us Quote Serivce RMA Request International Shipping Canadian Customers Purchase Order Terms & Conditions	Login Forget ID/Password Order Status Order Tracking	About Us JOBS	Rebate Center Forms VAR Program
Copyright © 1995 - 2008 NeutronExpress.com All rights reserved