MODEL- 2L1715             VENDOR- ATEN
  
FEATURES- MasterView Pro 1000 Series Daisy Chain Cable- 50 feet
       The cables that you use when connecting your computer to our 
        MasterView KVM switches play a very important role in the quality 
        of the communication between the PCs and the MasterView unit. Our 
        custom made cables are designed to provide the highest signal 
        capacity along with the lowest signal loss. What this means, to you 
        as the consumer, is that you will receive the highest quality video 
        output even in the higher SuperVGA video modes. 
       Your average cable has one layer of shielding, a thin layer of mylar 
        foil that has been cut into a very long and narrow, approximately 
        one half of an inch wide, strip that is wound in a spiral pattern 
        around the wires, also called leads, in order to reduce the cost of 
        the cable. There are a few problems with this method of shielding a 
        signal bearing cables, first and foremost among them is the fact 
        that this wrapped foil method can "leak" RF (radio frequency) 
        interference. Additionally the manufacturers of your average cables 
        use very small wires to carry the information generally they use 28 
        or 26 AWG wires (in AWG the higher the number for the gauge the 
        smaller the actual size of the wire) to carry their information, 
        this is another concession to reducing the manufacturing costs of 
        the cables. Some of your other "Premium" cables are made in the 
        same way and with the same materials as your average cable. The 
        manufacturers put fancy connectors on the cable then stamp the word 
        "Premium" on the packaging and then charge you more for the cable. 
       At ATEN we have invested millions of dollars into cable 
        manufacturing to ensure the highest quality cables at the lowest 
        possible cost. Our cables are double shielded, beneath the PVC 
        outer insulator you will find a copper braid RF shield, then 
        beneath that you will find the mylar foil shield. Unlike our 
        competitors instead of spiral wrapping the mylar foil shield, we 
        take a single piece and enclose the signal carrying wires in a one-
        piece envelope. All our cables are manufactured with low resistance 
        and low capacitance 24 AWG wires to ensure the best video 
        performance. Another important difference between our cables and 
        those of our competitors is that we use coaxial wires to carry the 
        red, green, and blue video signals. Our competitors just throw the 
        signal and its ground on two separate wires. By using coaxial wires 
        we reduce the possibilities of interference even farther. Our video 
        cable is also built in compliance with standard UL 2919. The cables 
        we manufacture for our mouse and keyboard are also built to our 
        high quality requirements and are in compliance with the UL 2464 
        standard.
     
  -- SPECIFICATIONs -----------------------------------
CONNECTORS   - Input : DB25 Male
               Output: DB25 Female
www.aten-usa.com