Welcome To NEUTRONEXPRESS.COM

Overview

Accessories

Ext. SPEC

DataSheet

The NEC MD21GS-2MP-BK-CB is a 21.3 inch, 2Mega Pixel Medical Grade, Gray Scale, Clear Base LCD which can be positioned in either Landscape or Portrait mode. The MultiSync MD Series, a family of medical grade LCDs, has been designed exclusively for the demanding needs of the diagnostic professional. This series embodies the precision, high performance and intelligence you’d expect from a world leader in display technology. The medically certified 21.3” 2-MegaPixel display features the X-Light technology, which allows for consistent brightness and white point levels throughout the life of the monitor and provides the basis for excellent diagnostic quality.

Features:

X-Light Technology

GammaComp MD software

Fast switch Gamma curves

Rapid Response

Black-level adjustment

Ultra-thin frame design

Internal power supply

Anti-glare and low reflection screen

Portrait or Landscape orientation

Factory calibration and consistency: NEC MultiSync MD Series monitor is calibrated to the DICOM display function for luminance and to a desired whitepoint (color of the white) – whether for clear base or blue base. NEC Display Solutions’ patent-pending X-LightTM technology has the unique ability to control and adjust the luminance and whitepoint via an integrated fastfeedback internal backlight sensor, which continuously monitors and realigns these settings to maintain the factory calibration throughout the life of the monitor. X-Light technology also alleviates the color shift of the backlight to the yellow spectrum, a common issue with competitive models.

Monitor matching and reduced downtime: Another aspect of X-Light technology is its effective and efficient use in larger radiology departments and their IT infrastructure in hospitals. X-Light allows for easy multiple monitor matching – whether matching the whitepoints of two monitors or many monitors, the capability is virtually limitless. Since all X-Light-equipped monitors are set for the same whitepoint during production, they can be exchanged at any time within one location and swapped in existing dual- or multi-screen configurations.

Standalone calibration and monitor matching: NEC MultiSync MD Series monitors have been designed to maintain their factory calibration. However, if calibration or matching to a replacement is required, the monitors can be configured using the built-in,
standalone algorithm programmed into the monitor’s firmware. This feature is useful for monitors that are not used in a setup where calibration can easily be performed with a PC and external software or non-supported operating systems.

Ultra-thin-frame design: The dynamic cabinet design has become a trademark of NEC Display Solutions TFT displays. With a bezel width of only 16mm, they are perfectly suited to digital diagnostics systems in which two or more screens are positioned next to each other. The ultrathin frame minimizes eye distraction during side-by-side image viewing.

GammaComp™ MD calibration and conformance software: Quality control and calibration/matching can also be accomplished using GammaComp MD, ensuring consistent image quality on a single display system. The software maintains the monitor’s conformance to the DICOM standard, while providing an easy-to-use QA environment for medical imaging. Optionally, GammaComp MD Administrator provides centralized control and management of multiple display systems.

3061 shades of gray: The NEC MultiSync MD Series provides support for improved diagnostic accuracy with simultaneous reproduction of up to 1024 from a palette of 3061 possible grayscales. The programmable 10-bit gamma correction ensures precise and smooth grayscale tuning and better representation of just noticeable differences (JNDs). Up to 1024 grayscales can be depicted at the same time for filmless diagnosis.
Of course, grayscale images based on the internationally accepted DICOM standard (256 grayscales) can be viewed as well. Fast, internal switching of the related look-up tables (LUTs) supports the display’s usage for softcopy reading of images from different medical modalities.

SA Superfine TFT displays: The innovative SA Superfine TFT glass with 2- or 3-Megapixel resolution delivers a brilliant picture with a wide viewing angle of up to 176° and minimal off-angle color shift.

Anti-glare and low reflection: The SA Superfine TFT glass utilizes round resin beads instead of inconsistently shaped silica gel within the glass substrates for advanced glare reduction. Additionally, a low reflection overcoat is applied on top of the bead layer, which yields a low, uniform reflection over the surface of the glass. This process also provides for a truer representation
of black and a higher contrast ratio.

Mutiple video card support: NEC MultiSync MD Series monitors work with 10-bit or 8-bit cards, however, 10-bit is recommended for optimum performance. 10-bit provides 1024 out of 3061 shades, while 8-bit provides only 256 out of 3061.
The above mentioned Video Cards available in this Site:
Matrox 3MP Video Card : (Part # MDM10B-3MP)
Matrox 2MP Video Card: (Part # MDM10B-2MP)

Internal power supply: The NEC MultiSync MD Series features an internal power supply.Thereby ground or desk clutter from a clunky power supply is eliminated.

Optional Accessory:

Protective shield(Look for Part # MD21PS-BK in this site): As these displays are often used by diagnostic professionals for illustration purposes, it is common for them to encounter frequent contact from fingers, pointers and pens. To help protect against LCD screen damage while maintaining the display’s optimal image quality, an optional protective shield is available. This lightweight accessory, which is quickly and easily attached and removed, lengthens the life of the screen by fending off scratches caused by surface contact. The 100% transparent shield features anti-reflective coating on both sides, anti-fingerprint coating on the outside layer, a hard coat for ruggedness and excellent permanent marker resistance.

SPECIFICATIONS:

General Information
Manufacturer	Nec Corporation
Manufacturer Part Number	MD21GS-2MP-BK-CB
Manufacturer Website Address	www.necsam.com
Product Line	MultiSync
Product Series	MD
Product Name	MultiSync MD Series Medical-grade Monitor
Marketing Information	MultiSync MD Series grayscale displays in combination with the appropriate graphics controller are designed for diagnostic imaging and for use in Picture Archiving and Communication System (PACS) applications. Furthermore, diagnostic imaging displays from NEC Display Solutions are based on technologies and functions which actively contribute to a reduction of cost of ownership. Flexible areas of application and reduced service costs are just a few examples that contribute to cost reduction in healthcare.
Product Type	LCD
Technical Information
Actual Screen Size	21.3"
Viewable Screen Size	21.3"
Projection Technology	Active Matrix TFT
Screen Surface	Anti-glare Anti-reflective
Dot Pitch	0.27mm
Input Signal	RGB (Analog) DVI-D (Digital)
Monitor Response Time	35 ms
Tilt/Swivel	25° Up \| 5° Down Tilt 340° Swivel
Viewing Angle	88° Up 88° Down 88° Left 88° Right
Mountable	100mm - (VESA)
Pivot Support	Landscape Portrait
Height Adjustable	1.81"
Display & Graphics
Resolution	1600 x 1200 Native Resolution
Color Support	Grayscale
Ratio	700:1 Contrast Ratio
Brightness	900 Nit
Interfaces/Ports
Interfaces	1 x 15-pin D-Sub 1 x DVI-D (Digital)
Ports	1 x USB
Power Description
Input Voltage	120 V AC
Power Consumption	65W Typical <3W Standby
Power Management System	EPA Energy Star
Physical Characteristics
Color	Black Clear Base
Dimensions	18.1" Height x 18.4" Width x 7.9" Depth - (Landscape) 20.2" Height x 14.1" Width x 7.9" Depth - (Portrait)
Weight	25.8 lb
Miscellaneous
Additional Information	Internal Power Supply Bezel Width: 16mm Mutiple video card support Brightness: 400 cd/m2 (117 fl) calibrated White Point (color temperature): P104 simulation, x=.292, y=.321, Approx. 8000 K Selectable Gamma: DICOM, log-linear, 2.2, 1.8 and programmable Sensor Calibration: Brightness/White Point/External
Certifications & Standards	UL2601/EN60601-1/EC601 FCC part 15 class B CE/MDD PCT C-tick PCBC/B Mark PSB EnergyStar GEEA Energy Label DIN 6868-57, FDA-510K
Manufacture Warranty
Standard Warranty	1 Year(s)
Parts Warranty/Labor	1 Year(s)

Customer Service	My Account	Company Info	Tools & Resources
Contact Us Quote Serivce RMA Request International Shipping Canadian Customers Purchase Order Terms & Conditions	Login Forget ID/Password Order Status Order Tracking	About Us JOBS	Rebate Center Forms VAR Program
Copyright © 1995 - 2008 NeutronExpress.com All rights reserved