Welcome To NEUTRONEXPRESS.COM

Overview

Accessories

DataSheet

Industrial Managed Redundant Ethernet Switch with 6 10/100BaseT(X) ports, 2 multi mode 100BaseFX ports, ST connector, 0 to 60°C

EDS-508A/505A is a plug-and-play managed redundant Ethernet switch. A set of Turbo Ring DIP switches makes it easy to set up MOXA Turbo Ring (recovery time < 300 ms) to increase system reliability. In addition, EDS-508A/505A supports many advanced managed features, such as QoS, 802.1Q VLAN, port-based VLAN, 801.1X, SSL, SNMP V1/V2c/V3, IGMP Snooping, Port Trunking, and RMON for network management. The extended operating temperature range of -40 to 75°C is also available.

Features:
Advanced Industrial Networking Capability

·	Plug-n-Play, Redundant Ethernet Ring (recovery time < 300 ms at full load) and RSTP/STP (IEEE802.1W/D)

·	IGMP Snooping and GMRP for filtering multicast traffic from industrial Ethernet networks
·	Supports port-based VLAN, IEEE802.1Q VLAN, and the GVRP protocol to ease network planning

·	Supports QoS-IEEE802.1p/1Q and TOS/DiffServ to increase determinism
·	Supports 802.3ad, LACP for optimum bandwidth utilization
·	Port Trunking for optimum bandwidth utilization
·	RMON for efficient network monitoring and proactive capability
·	SNMP V1/V2c/V3 for different levels of network management security
·	Supports IEEE802.1X and https/SSL to enhance network security

Designed for Industrial Applications

·	Bandwidth management prevents unpredictable network status
·	Supports ABC-01 (Automatic Backup Configurator) for system configuration back up
·	Lock-port for authorized-only MAC address access
·	Port mirroring for online debugging
·	Automatic warning by exception through email, relay output
·	Digital inputs to integrate sensors and alarms with IP networks
·	Automatic recovery of connected devices' IP addresses
·	Line-swap fast recovery (Patented)
·	Redundant, dual DC power inputs
·	40 to 75°C operating temperature range
·	IP30, rugged high-strength case
·	Long-haul transmit distance of 40 km or 80 km
·	DIN-Rail or panel mounting ability
·	Configurable by Web browser, Telnet/Serial console, Windows utility
·	Send ping commands to identify network segment integrity

Recommended Software and Accessories

·	SNMP OPC Server Pro
·	DR-4524, DR-75-24, DR-120-24 DIN-Rail 24 VDC Power Supply Series

Specifications:

Technology

Standards

IEEE802.3, 802.3u, 802.3x, 802.1D, 802.1W, 802.1Q, 802.1p , 802.1X, 802.3ad

Protocols

IGMP V1/V2/V3 device, GVRP, SNMP V1/V2c/V3, DHCP Server/Client, BootP, TFTP, SNTP, SMTP, RARP, GMRP, LACP, RMON and EDS-SNMP OPC Server Pro (Optional)

MIB

MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON Group 1, 2, 3, 9

Flow Control

IEEE802.3x flow control, back pressure flow control

Interface

RJ45 Ports

10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection

Fiber Ports

100BaseFX ports (SC/ ST connector)

Console

RS-232 (RJ45)

LED Indicators

PWR1, PWR2, FAULT, MASTER, COUPLER, 10/100M

DIP Switch

Turbo Ring, Master, Coupler, Reserve

Alarm Contact

Two relay outputs with current carrying capacity of 1A @ 24 VDC

Digital Input

Two inputs with the same ground, but electrically isolated from the electronics

+13 to +30V for state ?1?

-30 to +3V for state ?0?

Max. input current: 8 mA

Optical Fiber

Distance

Multi mode:
0 to 5 km, 1300 nm (50/125 ?m, 800 MHz*km)
0 to 4 km, 1300 nm (62.5/125 ?m, 500 MHz*km)
Single mode:
0 to 40 km, 1310 nm (9/125 ?m, 3.5 PS/(nm*km))
0 to 80 km, 1550 nm (9/125 ?m, 19 PS/(nm*km))

Min. TX Output

Multi mode: -20 dBm
Single mode: 0 to 40 km, -5 dBm; 0 to 80 km, -5 dBm

Max. TX Output

Multi mode: -14 dBm
Single mode: 0 to 40 km, 0 dBm; 0 to 80 km, 0 dBm

Sensitivity

-36 to -32 dBm (Single mode); -34 to -30 dBm (Multi mode)

Power

Input Voltage

24 VDC (12 to 45 VDC), redundant dual inputs

Connection

Two removable 6-pin terminal blocks

Overload Current Protection

Present

Reverse Polarity Protection

Present

Mechanical

Casing

IP30 protection, aluminum case

Dimensions

80.5 x 135 x 105 mm (W x H x D)
3.17 x 5.31 x 4.13 in.

Weight

1040 g

Installation

DIN-Rail, Wall Mounting (optional kit)

Environmental

Operating Temperature

0 to 60°C (32 to 140°F),
-40 to 75°C (-40 to 167°F) for -T models

Storage Temperature

-40 to 85 °C (-40 to 185°F)

Ambient Relative Humidity

5% to 95% (non-condensing)

Regulatory Approvals

Safety

UL60950, UL 508, CSA C22.2 No. 60950, EN60950 (all pending)

Hazardous Location

UL/cUL Class I, Division 2, Groups A, B, C and D (pending)
ATEX Class I, Zone 2, EEx nC IIC (pending)

EMI

FCC Part 15, CISPR (EN55022) class A

EMS

EN61000-4-2 (ESD), Level 3
EN61000-4-3 (RS), Level 3
EN61000-4-4 (EFT), Level 4
EN61000-4-5 (Surge), Level 3
EN61000-4-6 (CS), Level 3
EN61000-4-8, EN61000-4-11, EN61000-4-12

Shock

IEC60068-2-27

Freefall

IEC60068-2-32

Vibration

IEC60068-2-6

Warranty

5 years

Customer Service	My Account	Company Info	Tools & Resources
Contact Us Quote Serivce RMA Request International Shipping Canadian Customers Purchase Order Terms & Conditions	Login Forget ID/Password Order Status Order Tracking	About Us JOBS	Rebate Center Forms VAR Program
Copyright © 1995 - 2008 NeutronExpress.com All rights reserved