Shopping Cart
MOXA - NE-4100T-CMD (Our ITEM #: 351363)
Serial (TTL) to 10/100Mbps Ethernet Network Enabler module, DIL package - w/CMD Software
Unit Price $50.05
Stock Available
Free Shipping
for Contiguous 48 states
Quantity:
Check other service levels
Volume Pricing
QtyUnit Price
1 ~ 2 $50.05
3 ~ 7 $49.55
8 ~ 14 $49.05
15 ~ 24 $48.55
25 or more $48.05
 
 Overview   DataSheet 
Moxa PD Frame
Introduction
NE-4100-CMD Series

NE-4100-CMD Series is an advanced series of Embedded Network Enablers. Based on Moxa's NE-4100 Series, the command mode models provides customers with the ability to send serial commands via the serial port. Serial commands are used to retrieve or configure parameters stored in the flash memory, and since the commands are sent via the module's serial port, NE-4100-CMD Series offers serial device manufacturers the option of adding local configuration capability to their products. For example, card reader manufacturers can program the keypad on a card reader to configure network settings (IP address, netmask, etc.) and serial settings (baud rate, data bits, etc.), allowing end-users to configure the device on-site, without the need to carry around and set up a laptop.

Typical Applications
  • Card Reader Manufacturers
  • Electronic Scales Manufacturers
  • Manufacturers of Keypads, LCD Display Devices, and other devices with an HMI (Human Machine Interface)  

    Model Names
    The following five models are available:
  • NE-4100T-CMD Serial (TTL) to Ethernet—Drop-in type
  • NE-4110S-CMD Serial (RS-232) to Ethernet—RJ45 type
  • NE-4110A-CMD Serial (RS-422/485)  to Ethernet—RJ45 type
  • NE-4120S-CMD Serial (RS-232)  to Ethernet—Pin-header type
  • NE-4120A-CMD Serial (RS-422/485) to Ethernet—Pin-header type

  • Specification differences of NE-4100-CMD Series Models

    Models Name

    NE-4100T-CMD

    NE-4110S-CMD
    NE-4120S-CMD

    NE-4110A-CMD
    NE-4120A-CMD

    Interface

    TTL x 2

    RS-232 x 1, TTL x 1 

    RS-422/485 x 1,
    TTL x 1

    Signals

    TxD, RxD, RTS, CTS,
    DTR, DSR, DCD, GND
    (An additional pin is reserved
    for your design requirements)

    TxD, RxD, RTS, CTS,
    DTR, DSR, DCD, GND
    RS-422: Tx+, Tx-, Rx+, Rx-, GND
    4-wire RS-485:  Tx+, Tx-, Rx+, Rx-
    2-wire RS-485: Data+, Data-, GND
    Features
    • Easy to configure network settings on-site
    • Simple command frame format
    • Comprehensive readable command set for network settings and serial settings
    • Easily switch between Software and Hardware Trigger Types
    • Software Reset available
    Specifications
    LAN
    Ethernet
    Auto-detecting 10/100 Mbps
    Protection
    Built-in transformer with 1.5KV magnetic isolation
    Pins
    ETx+, ETx-, RTx+, RTx-
    Serial Communication Parameters
    Parity
    None, Even, Odd, Space, Mark
    Data Bits
    5, 6, 7, 8
    Stop Bits
    1, 2
    Flow Control
    RTS/CTS, XON/XOFF
    Speed
    50 bps to 115.2 Kbps
    GPIO
    GPIO
    Programmable x 4, PIO
    Software Features
    Protocols
    ICMP, ARP, IP, TCP, UDP, DHCP, NTP
    Operating Modes
    TCP Server, TCP Client, UDP, Real COM
    Utilities
    Administration utility for Windows 95/98/ME/NT/2000/XP
    Management
    Serial Commands, Web browser, serial console, Telnet console, or Windows utility library for developing your own utility
    Configuration Interface
    NECI library for developing your own utility
    Power Requirements
    Power input
    5 VDC, ±5%
    Power consumption
    290 mA (at 5 VDC max.)
    Environmental
    Operating Temperature
    0 to 70°C (32 to 158°F), 5 to 95% RH
    Storage Temperature
    -20 to 85°C (-4 to 185°F), 5 to 95% RH
    Regulatory Approvals
    EMC
    FCC Class A, CE Class A
    Warranty
    5 years
    Standard Moxa Product Warranty
    Ordering Information
    NE-4110S-CMD
    Serial Command Mode Version of NE-4110S, 100 Mbps Ethernet Network Enabler for RS-232 Devices, with RJ45 Ethernet connector
    NE-4110A-CMD
    Serial Command Mode Version of NE-4110A, 100 Mbps Ethernet Network Enabler for RS-422/485 Devices, with RJ45 Ethernet connector
    NE-4120S-CMD
    Serial Command Mode Version of NE-4120S, 100 Mbps Ethernet Network Enabler for RS-232 Devices, with 5-pin Ethernet pin header
    NE-4120A-CMD
    Serial Command Mode Version of NE-4120A, 100 Mbps Ethernet Network Enabler for RS-422/485 Devices, with 5-pin Ethernet pin header
    NE-4100T-CMD
    Serial Command Mode Version of NE-4100T, 100 Mbps Ethernet Network Enabler for TTL Devices, with DIL package

    Product Search:

    Product Search

    Find similar products in:

    MANUFACTURER STORE»...
    Embedded Device Servers (41)
    INDUSTRIAL CONTROL»...
    Serial (401)

    Customer Service My Account Company Info Tools & Resources
    Copyright © 1995 - 2008 NeutronExpress.com All rights reserved