Welcome To NEUTRONEXPRESS.COM

Overview

DataSheet

Moxa PD Frame

Introduction

NE-4100T

NE-4100T offers a complete Ethernet connectivity solution (such as TCP Server, TCP Client, UDP) to network-enable your serial devices. With its compact size—only 45 x 36 mm, or less than half the size of your credit card—you can easily integrate NE-4100T into your serial device to make the device 10/100M Ethernet-ready.

Industrial-proven, built-in TCP/IP stack
NE-4100T's industrial-proven, built-in TCP/IP stack makes it easy for your R&D engineers to network-enable your serial device since they wont need to put a lot of effort into TCP/IP programming. This means that they can dedicate the majority of their time to developing other important features, and you can reduce your time to market. The 10/100M Ethernet auto-sensing interface lets your device use the higher 100 Mbps access speed when available. In addition, NE-4100T's 4 GPIO pins provide ample design flexibility, giving you the freedom to develop the features your customers need. NE-4100T's 5V design is better suited for today's equipment, and R&D engineers can spend less effort implementing the power circuit.

User-friendly configuration options
Configuration is done with a user-friendly Windows utility, Web browser, Telnet console, or serial console. In addition, a Windows-based NECI (Network Enabler Configuration Interface) Library is available to help you develop your own Windows utilities.

Shorter time to market
NE-4100T has a standard pin space (0.254 mm) with a dual-in-line, 26-pin design that lets you shorten the layout time and get your product to market in no time. The built-in transformer ensures a noise-free signal, and also saves time and space when designing the Ethernet circuit.

NE-4100-ST Starter Kit
An NE-4100-ST Starter Kit that includes everything you need to develop your application is also available. The Starter Kit includes an evaluation board, SDK, documentation, cables, and accessories.

Applications

Industrial Automation (PLC, metering devices)

Medical/Healthcare (ECG, ultrasonic monitoring, blood testing devices)

Building Automation (HVAC, fire alarms)

Security/Surveillance (card readers, biometric identification devices)

Information Appliances (UPS monitor modules)

NE-4100T Block Diagram

NE-4100T Schematic

Pin Assignments

Pin No.	Signal	Pin No.	Signal
1	ETx+	14	PIO0
2	ETx-	15	PIO1
3	ERx+	16	PIO2
4	ERx-	17	PIO3
5	LED 10M	18	LED 100M
6	TXD	19	DCD
7	RXD	20	DSR
8	RTS	21	DTR
9	CTS	22	GND
10	Reset	23	Ready LED
11	GND	24	+5V
12	GND	25	+5V
13	TXD1*	26	RXD1*
*TXD1 and RXD1 (pins 13 and 26) are reserved for use by the second UART—set these pins to 0 (zero) for RS-232 status, and set to 1 (one) for debug status.

Features

Serial (TTL) to 10M Ethernet drop-in module for embedded device networking
Compact size (44 x 32 mm) and Dual-In-Line pin headers for easy integration
Ready-to-use TCP/IP firmware for fast integration
TCP Server, TCP Client, UDP, Real COM driver operation modes
Easy configuration with Web browser, serial console, and Windows utility
Low power consumption (1.5W)
Dedicated 4 GPIOs for user's configuration
Programmable version available

Specifications

LAN

Ethernet

Auto-detecting 10/100 Mbps

Protection

Built-in transformer with 1.5 KV magnetic isolation

Pins

ETx+, ETx-, RTx+, RTx-

Serial Interface

RS-232

TTL x 2

Pins

TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
(An additional pin is reserved for your design requirements.)

Serial Communication Parameters

Parity

None, Even, Odd, Space, Mark

Data Bits

5, 6, 7, 8

Stop Bits

1, 2

Flow Control

RTS/CTS, XON/XOFF

Speed

50 bps to 115.2 Kbps

GPIO

Programmable x 4, PIO

Software Features

Protocols

ICMP, ARP, IP, TCP, UDP, DHCP, Telnet, HTTP, SNMP, SMTP

Operating Modes

TCP Server, TCP Client, UDP, Real COM

Utilities

Administration utility for Windows 95/98/ME/NT/2000/XP

Management

Web browser, serial console, Telnet console, or Windows utility library for developing your own utility

Configuration Interface

NECI library for developing your own utility

Power Requirements

Power input

5 VDC, ±5%

Power consumption

290 mA (at 5 VDC max.)

Environmental

Operating Temperature

0 to 70°C (32 to 158°F), 5 to 95% RH

Storage Temperature

-20 to 85°C (-4 to 185°F), 5 to 95% RH

Regulatory Approvals

EMC

FCC Class A, CE Class A

Manufacture Warranty

5 years

Standard Moxa Product Warranty

Ordering Information

NE-4100T

10/100 Mbps Ethernet Network Enabler for Serial (TTL) Devices, with DIL package

NE-4100T-CMD

Serial Command Mode Version of NE-4100T, 100 Mbps Ethernet Network Enabler for TTL Devices, with DIL package

NE-4100-ST

Starter Kit for NE-4100T, NE-4100T-P, NE-4100T-CMD; package includes:

NE-4100-ST evaluation board

Documentation & Software CD; includes NE utility, SDK, and User's Manual

NE-4100 Series Quick Installation Guide (printed)

Universal Power Adaptor

2 Power Cords

Ethernet Cross-Over Cable

Null Modem Serial Cable

MOXA 5-Year Warranty Booklet

*NOTE: The NE module must be purchased separately.

Customer Service	My Account	Company Info	Tools & Resources
Contact Us Quote Serivce RMA Request International Shipping Canadian Customers Purchase Order Terms & Conditions	Login Forget ID/Password Order Status Order Tracking	About Us JOBS	Rebate Center Forms VAR Program
Copyright © 1995 - 2008 NeutronExpress.com All rights reserved