◎    Features

＊ Dual AC IN-Put design： AC-1 be Master source, AC-2 be second source.

＊ Dual AC PATENT ： USA, Germany, Taiwan, ( Patent no. 136053 )

Specification

AC Input Voltage:96 to 132 or 185 to 264 auto selectable 50 to 60 Hz.

DC Output: 

AP-RRP4ATX40  400W+400W      max output 400W    peak surge 455W   

+ 5V=max 35A,    +3.3V=max  16A,    + 12V=max  18A (Peak 24A),

-5V=max 0.5A,     -12V=max  0.8A,     +5V S/B=max 2.0A

Combine power : 230W

HOT-SWAP      The power system provides a Hot-Swap function. This means

                           when either one of the redundant power supplies fails or breaks

                           down, you can easily replace failed unit without any interference

                           to the system.

  BUZZER      A warning buzzer sounds when any one of the power supplies

                        fails. The warning buzzer is reset table from reset switch either

                        the one in front control panel or the one on the rear side.                      

  LED’S       The warning LED’S can be found either on the rear side or the

                    control panel of the power system. Tells if one of the two power supplies has

                    failed, by LED blinking.

HOT-PLUGGABLE   The power system provides a Hot-Pluggable function

                                     This method allows the power units in the Disk Array/

                                      File Server to be removed or inserted very easily without

DIMENSION:  L 200 x W150 x H 86 mm