• Add two CardBus/PCMCIA sockets via 1 PCI slot. Multiple units can coexist in the same computer
• Mount inside any system, including low profile bracket to mount in low profile PC
• Plug and play under Windows 98SE, Me, 2000 and XP
• Support Type I, II and III PC card
• Great for Wireless LAN card, modem card, USB 2.0 PC card, Firewire PC card, SCSI PC card, LAN PC card, ATA Flash, PCMCIA hard drive, CD-DigiAdapter, Dual 4-in-1 DigiAdapter or any CardBus adapter.

• 2 PC card slots, fully compliant with PC Card standard 7.1
• Support Type I, II and III PC cards
• Include low profile PC mounting bracket
• PCI Bus Power Management Interface Specification 1.1 compliant
• Advanced Configuration and Power Interface Specification 1.0 compliant
• PCI Local Bus Specification Revision 2.2 compliant
• PC 98/99 compliant
• Compliant with the PCI Bus Interface Specification for PCI-to-CardBus Bridges
• Supports active Flash media and Smart Card adapters
• Programmable D3 status terminal
• Mix-and-match 5-V/3.3-V 16-bit PC Cards and 3.3-V CardBus cards
• Supports two PC Card or CardBus slots with hot insertion and removal
• Supports 132-MBps burst transfers to maximize data throughput on both the PCI bus and the CardBus bus
• Interrupt modes supported: serial ISA/serial PCI, serial ISA/parallel PCI, parallel PCI only
• Multifunction PCI device with separate configuration space for each socket
• Five PCI memory windows and two I/O windows available to each 16-bit PC Card socket
• Two I/O windows and two memory windows available to each CardBus socket
  
• Compatible with 98SE, Me, 2000 and XP
• Dimension:
• 1 year Manufactures warranty

All specifications are subject to change without notice

• PC/AT or Compatible System
• One free PCI slot
  
• Pentium or greater
  
• Minimum 32 MB RAM
  
• 10 MB minimum free hard disk space
  
• One of the following operating systems: Windows 98SE, Me, 2000 or XP