MODEL- SL150              VENDOR- CHIEF MANUFACTURING
 
FEATURES- Smart-Lift Electric Ceiling Lift
       The SL-150 SMART-LIFT assures a pleasing installation for homes and 
        corporate offices by its exceptionally smooth and quiet movement. 
        Designed to fit most installation requirements, the SL-150 needs 
        only eleven inches of ceiling clearance, easily accommodates 
        multiple control options, and is plenum rated. We understand the 
        complexity of lift installations and have a helpful technical staff 
        available to assist with questions.
 * Plenum rated 
 * Low profile - 11" overall height 
 * 8 1/4" of travel distance 
 * Low voltage controlled 
 * Suitable for push-up table top installation 
 * Projector Roll, Pitch and Yaw 
 * Fore/aft, left/right projector positioning 
 * Vertical projector cradle adjustment 
 * Quick projector disconnect/reconnect 
 * Three mounting methods 
 * Two internal outlets, one is switched on 110V units 
 * Used with finished or suspended ceiling 
 * Horizontal and vertical cradle positioning 
 * All electrical components are UL, CSA and VDE listed
 * Three Mounting Methods:
   1. Three 3/8" Threaded Rods. Three point mounting for easier leveling.
   2. 1 1/2" Extension Column with SMA-600. Provides 1 1/2" horizontal 
      adjustment.
   3. Side mounting using the built in joist tabs. Allows installation 
      directly into wood framed ceilings.
 
 -- SPECIFICATIONS --------------------
Downward Travel:                 8 1/4" / 209.55mm 
Minimum Clearance Above Ceiling: 11 inches 
Overall Dimension (Up Position): 11"h x 22 1.8"w x 26 1.8"d
                                 279.4mm x 562mm x 664mm 
Maximum Projector Size:          9.5"h x 18"w x 22.25"l inches 
Ceiling Opening:                 22"w x 25 3/4"d (+3/8", -0")
                                 558.8mm x 654.1mm 
Ceiling Closure Panel:           19 5.8"w x 23 3/8"d 
                                 498.6mm x 593.8mm 
Voltage:                         120V or 230V 
Low Voltage:                     Will accept 5 - 30V AC/DC for triggering 
                                  commands 
Current Draw:                    0.9 Amps continuous 
Net Weight:                      66 lbs./29.7 kg 
Lift Capacity:                   35 lbs. 
Projector Adjustment Features:   Roll +/- 2 degrees
                                 Pitch +/- 12 degrees
                                 Yaw +/- 5 degrees
                                 Horizontal and vertical cradle positioning 
www.chiefmfg.com