Widely used in miltary, FBI, goverment, National labs, universities, traffic control industry, security industry, defense industry,... Professional people's best choice.

CompactFlash compliant

Conforms to CompactFlash standard

Fully compatible with PC Card standard and PC Card ATA

Support for CIS implemented with 256 bytes of attribute memory

Compatible with all PC Card Services and Socket Services

Toshiba/ Hitachi/ Mitsubishi Flash inside/ 3S controller !!

ATA/IDE interface

ATA command set compatible

Support for 8- or 16-bit host transfers

Programmable and auto-wait-state generation for compatibility with any host speed using IORDY

Compatible with host ATA disk I/O BIOS, DOS/Windows file system, utilities, and application software

Extremely rugged and reliable

Solid-state reliability

1000-G operating / non-operating shock. 15-G vibration

500,000 power-on hours MTBF

Built-in 48-bit "on-the-fly" ECC

High performance

Fast ATA host-to-buffer burst transfer rates up to 20 Mbytes/second

Supports PIO mode 4, both at 16.6 Mbytes/second

Buffer transfer rates to and from flash memory up to 12.5 Mbytes/second

Sustained write up to 2.9 Mbytes/second

Sustained read up to 5.6Mbytes/second

Single +5 Volt or 3.3 Volt power supply. Very low power consumption with automatic power management.

Zero-power data retention, no batteries required

Performance:

Data Transfer Rates: up to 4.1Mbyte/sec in ATA PIO mode 4

To/from Flash memory up to 12.5 Mbytes/sec

To/from host up to 20Mbytes/sec

Sustained write up to 2.98Mbyte/sec in ATA PIO mode 4

Sustained read up to 5.62Mbyte/sec in ATA PIO mode 4

Command to DREQ <500µsec

Idle to Read <1 µsec

Idle to Write <1 µsec

Dual-port data buffer 4 Kbytes SRAM

Reliability:

MTBF 500,000 power-on hours

Error Rate less than 1 bit error in 1015 bits read (min)

ECC 48-bit polynomial ECC supporting two random bits of a sector "on-the-fly" ECC corrections

Ruggedness:

Shock, operating or non-operating 1000-G, any axis or direction Vibration, operating or non-operating 15-G peak, 0.5 sine wave, 10-1500 Hz, any axis or direction

Operating Voltage: 5V +/- 10% or 3.3V +/ -5%

Power consumption:

Read mode 30 mA (typ)

Write mode 30 mA (typ)

Sleep mode 100uA (typ)