| General |
| Device Type | Router |
| Form Factor | Rack-mountable - modular - 3U |
| Installed Modules Qty (Max) | 1 (installed) / 8 (max) |
| Approximate Width | 16.8 in |
| Approximate Depth | 17 in |
| Approximate Height | 5.2 in |
| Bundled with | Cisco 7200VXR NPE-G1 Network Processing Engine |
| Processor |
| Type | 1 x Broadcom BCM1250 700 MHz |
| Max Supported Qty | 1 |
| Memory |
| RAM | 256 MB (installed) / 1 GB (max) - DDR SDRAM |
| Flash Memory | 64 MB (installed) / 256 MB (max) |
| Networking |
| Connectivity Technology | Wired |
| Data Transfer Rate | 1 Gbps |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
| Network / Transport Protocol | TCP/IP, UDP/IP |
| Routing Protocol | OSPF, IGRP, RIP, IS-IS, BGP, EIGRP, HSRP |
| Remote Management Protocol | SNMP, Telnet |
| Features | Modular design, full duplex capability, DHCP support, NAT support, RARP support, ARP support, VLAN support |
| Compliant Standards | IEEE 802.1Q |
| Expansion / Connectivity |
| Expansion Slots Total (Free) | 3 ( 3 ) x GBIC
8 ( 7 ) x expansion slot
2 ( 0 ) x memory
1 CompactFlash Card |
| Interfaces | 3 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45
1 x management - console
1 x management - auxiliary |
| Miscellaneous |
| Authentication Method | RADIUS, PAP, CHAP, TACACS |
| Compliant Standards | FCC Class A certified, VCCI Class B ITE, EN 60950, EN55022, IEC950, UL 1950, CSA 22.2 No. 950 |
| Power |
| Power Device | Power supply - hot-plug / redundant - plug-in module |
| Installed Qty / Max Supported Qty | 1 (installed) / 2 (max) |
| Voltage Required | AC 120/230 V AC 100/240 V ( 50/60 Hz ) |
| Software / System Requirements |
| OS Provided | Cisco IOS IP Plus |
| Environmental Parameters |
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 104 °F |
| Humidity Range Operating | 10 - 90% |
Shopping Cart
